Smart Home AC110V 220V Single1 Channel Remote Controller Receiver Wireless RF Radio Frequency Hall Bedroom Light Switch 433MHz
280
Direct purchase from the factory 
Ka sɛn sɔgɔsɔgɔninjɛ
Sɔnni hɔrɔn
Ka taa cogo
Ka segin cogoSɔnni Hɔrɔn
I ni ce Roymall, i ka sɔnniw siti. An bɛ i ka dɛmɛ fɛɛrɛ. O sɔnni hɔrɔn bɛ kɛ i ka sɔnni kɛnɛ kan.Ka Taa Cogo
An bɛ sɔnniw taa i ka so la 2 don kɔnɔ. Kɛnɛ cɛsiri bɛ se ka kɛ 5-7 don kɔnɔ.1. Ka Segin Cogo
Sɔnniw bɛ segin 40 don kɔnɔ. Sɔnni yɛlɛman tɛ segin.2.Ka Sɛn Segin
I bɛ sɛn sɔrɔ segin kɔnɔ.
Feature:
1. Work voltage: AC85-250V
2. Static conditions: less than 8mA
3. Work temperature: -40 degrees+80 degrees
4. Receive sensitivity: greater than -105dbm
5. Working frequency: 433MHz
6. Output voltage: input = output
7. Maximum load current: 10A
8. Size: 60.5 x 50 x 25.5mm
About working methods:
The jump line on the needle has changed the way of working
Switch: There are no two pins connecting the jumper.
Click: Press-> open; release-> off.
Self -locking: jumper connection pin 1 and 2.
Method: Press-> open; press the same button again-> Close u00b7
Mutual lock: jumper connection pin 2 and 3.
Relay: Press-> open; press other buttons-> Close.
About learning and clearing methods:
Learn: Press the learning button for 4-6 seconds, the indicator lights go out, release the finger, press any button on the remote control, the indicator lights flickered 5 times, indicating that the learning is successful.
Clear: Press the learning button for about 8 seconds, the indicator light from OFF to ON, and then press the remote control. The relay does not respond, indicating that the code is successful.
About remote:
1. button: 1 button
2. Work voltage: DC6V (use 2PCS CR2016, not includes)
3. Work frequency: 433MHz
4. Remote distance: 20-50M
5. Work current: 13 mAh time
6. Code: EV1527 code
7. Size: 5.7 x 3.2 x 1.1cm
Package includes:
1 x Remote
1 x Receiver
